KVR24S17S6/4

DESCRIPTION

This document describes ValueRAM's KVR24S17S6/4 as a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

• • Power Supply: VDD = 1.2V Typical
• • VDDQ = 1.2V Typical
• • VPP = 2.5V Typical
• • VDDSPD = 2.2V to 3.6V
• • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• • Low-power auto self refresh (LPASR)
• • Data bus inversion (DBI) for data bus
• • On-die VREFDQ generation and calibration
• • Single-rank
• • On-board I2 serial presence-detect (SPD) EEPROM
• • 8 internal banks; 2 groups of 4 banks each
• • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• • Selectable BC4 or BL8 on-the-fly (OTF)
• • Fly-by topology
• • Terminated control command and address bus
• • PCB: Height 1.18” (30.00mm)
• • RoHS Compliant and Halogen-Free

KVR32S22S6/8

DESCRIPTION

This document describes ValueRAM's KVR32S22S6/8 as a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

• • Power Supply: VDD = 1.2V Typical
• • VDDQ = 1.2V Typical
• • VPP = 2.5V Typical
• • VDDSPD = 2.2V to 3.6V
• • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• • Low-power auto self refresh (LPASR)
• • Data bus inversion (DBI) for data bus
• • On-die VREFDQ generation and calibration
• • Single-rank
• • On-board I2 serial presence-detect (SPD) EEPROM
• • 8 internal banks; 2 groups of 4 banks each
• • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• • Selectable BC4 or BL8 on-the-fly (OTF)
• • Fly-by topology
• • Terminated control command and address bus
• • PCB: Height 1.18” (30.00mm)
• • RoHS Compliant and Halogen-Free

KVR32S22S8/16

DESCRIPTION

This document describes ValueRAM's KVR32S22S8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

• • Power Supply: VDD = 1.2V Typical
• • VDDQ = 1.2V Typical
• • VPP = 2.5V Typical
• • VDDSPD = 2.2V to 3.6V
• • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• • Low-power auto self refresh (LPASR)
• • Data bus inversion (DBI) for data bus
• • On-die VREFDQ generation and calibration
• • Single-rank
• • On-board I2 serial presence-detect (SPD) EEPROM
• • 16 internal banks; 4 groups of 4 banks each
• • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• • Selectable BC4 or BL8 on-the-fly (OTF)
• • Fly-by topology
• • Terminated control command and address bus
• • PCB: Height 1.18” (30.00mm)
• • RoHS Compliant and Halogen-Free